diff --git a/board/actux1/config.mk b/board/actux1/config.mk
index 119140d..a0dbe0b 100644
--- a/board/actux1/config.mk
+++ b/board/actux1/config.mk
@@ -1,6 +1,6 @@
 TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
 
 LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds
index 40b5ef3..5c1ece7 100644
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -30,12 +30,12 @@
 
 	. = ALIGN (4);
 	.text : {
-		cpu/ixp/start.o(.text)
+		arch/arm/cpu/ixp/start.o(.text)
 		lib/string.o(.text)
 		lib/vsprintf.o(.text)
 		arch/arm/lib/board.o(.text)
 		common/dlmalloc.o(.text)
-		cpu/ixp/cpu.o(.text)
+		arch/arm/cpu/ixp/cpu.o(.text)
 		. = env_offset;
 		common/env_embedded.o(.ppcenv)
 		* (.text)
diff --git a/board/actux2/config.mk b/board/actux2/config.mk
index 119140d..a0dbe0b 100644
--- a/board/actux2/config.mk
+++ b/board/actux2/config.mk
@@ -1,6 +1,6 @@
 TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
 
 LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
index f9ab281..707c027 100644
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -30,12 +30,12 @@
 
 	. = ALIGN (4);
 	.text : {
-		cpu/ixp/start.o(.text)
+		arch/arm/cpu/ixp/start.o(.text)
 		lib/string.o(.text)
 		lib/vsprintf.o(.text)
 		arch/arm/lib/board.o(.text)
 		common/dlmalloc.o(.text)
-		cpu/ixp/cpu.o(.text)
+		arch/arm/cpu/ixp/cpu.o(.text)
 
 		. = env_offset;
 		common/env_embedded.o (.ppcenv)
diff --git a/board/actux3/config.mk b/board/actux3/config.mk
index 119140d..a0dbe0b 100644
--- a/board/actux3/config.mk
+++ b/board/actux3/config.mk
@@ -1,6 +1,6 @@
 TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
 
 LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index 2fc3796..497ab97 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -30,12 +30,12 @@
 
 	. = ALIGN (4);
 	.text : {
-		cpu/ixp/start.o (.text)
+		arch/arm/cpu/ixp/start.o (.text)
 		lib/string.o (.text)
 		lib/vsprintf.o (.text)
 		arch/arm/lib/board.o (.text)
 		common/dlmalloc.o (.text)
-		cpu/ixp/cpu.o (.text)
+		arch/arm/cpu/ixp/cpu.o (.text)
 
 		. = env_offset;
 		common/env_embedded.o (.ppcenv)
diff --git a/board/actux4/config.mk b/board/actux4/config.mk
index 9a634cd..f2b5fc9 100644
--- a/board/actux4/config.mk
+++ b/board/actux4/config.mk
@@ -1,4 +1,4 @@
 TEXT_BASE = 0x00e00000
 
 # include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
diff --git a/board/davinci/dvevm/board_init.S b/board/davinci/dvevm/board_init.S
index 22d8adc..81b23d0 100644
--- a/board/davinci/dvevm/board_init.S
+++ b/board/davinci/dvevm/board_init.S
@@ -2,7 +2,7 @@
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
  * Board-specific low level initialization code. Called at the very end
- * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
  * initialization required.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S
index 22d8adc..81b23d0 100644
--- a/board/davinci/schmoogie/board_init.S
+++ b/board/davinci/schmoogie/board_init.S
@@ -2,7 +2,7 @@
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
  * Board-specific low level initialization code. Called at the very end
- * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
  * initialization required.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/board/davinci/sffsdr/board_init.S b/board/davinci/sffsdr/board_init.S
index 22d8adc..81b23d0 100644
--- a/board/davinci/sffsdr/board_init.S
+++ b/board/davinci/sffsdr/board_init.S
@@ -2,7 +2,7 @@
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
  * Board-specific low level initialization code. Called at the very end
- * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
  * initialization required.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S
index fbb9ea7..3e4c7a2 100644
--- a/board/davinci/sonata/board_init.S
+++ b/board/davinci/sonata/board_init.S
@@ -2,7 +2,7 @@
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
  * Board-specific low level initialization code. Called at the very end
- * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
  * initialization required.
  *
  * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer
diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk
index b2fc6fa..b627869 100644
--- a/board/edb93xx/config.mk
+++ b/board/edb93xx/config.mk
@@ -1,4 +1,4 @@
-LDSCRIPT := $(SRCTREE)/cpu/arm920t/ep93xx/u-boot.lds
+LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
 
 ifdef CONFIG_EDB9301
 TEXT_BASE = 0x05700000
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 6f5bda4..2731294 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -37,7 +37,7 @@
 	  /* WARNING - the following is hand-optimized to fit within	*/
 	  /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-	  cpu/arm1136/start.o			(.text)
+	  arch/arm/cpu/arm1136/start.o			(.text)
 	  board/freescale/mx31ads/libmx31ads.a	(.text)
 	  arch/arm/lib/libarm.a			(.text)
 	  net/libnet.a				(.text)
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index 387ed2d..6455d1d 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -46,7 +46,7 @@
 /*
  * This the the zoom2, board specific, gpmc configuration for the
  * quad uart on the debug board.   The more general gpmc configurations
- * are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c
+ * are setup at the cpu level in arch/arm/cpu/arm_cortexa8/omap3/mem.c
  *
  * The details of the setting of the serial gpmc setup are not available.
  * The values were provided by another party.
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
index a7e175d..fd5389f 100644
--- a/board/lpc2292sodimm/flash.c
+++ b/board/lpc2292sodimm/flash.c
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
  *
- * Modified to use the routines in cpu/arm720t/lpc2292/flash.c by
+ * Modified to use the routines in arch/arm/cpu/arm720t/lpc2292/flash.c by
  * Gary Jennejohn <garyj@denx,de>
  *
  * This program is free software; you can redistribute it and/or
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
index a074420..29a4f61 100644
--- a/board/samsung/smdk6400/u-boot-nand.lds
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -34,8 +34,8 @@
 	. = ALIGN(4);
 	.text      :
 	{
-	  cpu/arm1176/start.o	(.text)
-	  cpu/arm1176/s3c64xx/cpu_init.o	(.text)
+	  arch/arm/cpu/arm1176/start.o	(.text)
+	  arch/arm/cpu/arm1176/s3c64xx/cpu_init.o	(.text)
 	  *(.text)
 	}
 
diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c
index 8cf17b8..fc91574 100644
--- a/board/siemens/SMN42/flash.c
+++ b/board/siemens/SMN42/flash.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
  *
  * (C) Copyright 2007 Gary Jennejohn garyj@denx.de
- * Modified to use the routines in cpu/arm720t/lpc2292/flash.c.
+ * Modified to use the routines in arch/arm/cpu/arm720t/lpc2292/flash.c.
  * Heavily modified to support the SMN42 board from Siemens
  *
  * This program is free software; you can redistribute it and/or
diff --git a/board/trab/rs485.c b/board/trab/rs485.c
index ad0c136..6a3a4cd 100644
--- a/board/trab/rs485.c
+++ b/board/trab/rs485.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2003
  * Martin Krause, TQ-Systems GmbH, <martin.krause@tqs.de>
  *
- * Based on cpu/arm920t/serial.c, by Gary Jennejohn
+ * Based on arch/arm/cpu/arm920t/serial.c, by Gary Jennejohn
  * (C) Copyright 2002 Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/board/trab/rs485.h b/board/trab/rs485.h
index 16d69bb..19e3244 100644
--- a/board/trab/rs485.h
+++ b/board/trab/rs485.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2003
  * Martin Krause, TQ-Systems GmbH, <martin.krause@tqs.de>
  *
- * Based on cpu/arm920t/serial.c, by Gary Jennejohn
+ * Based on arch/arm/cpu/arm920t/serial.c, by Gary Jennejohn
  * (C) Copyright 2002 Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/board/trab/u-boot.lds b/board/trab/u-boot.lds
index 05b929f..cd50e85 100644
--- a/board/trab/u-boot.lds
+++ b/board/trab/u-boot.lds
@@ -32,7 +32,7 @@
 	. = ALIGN(4);
 	.text      :
 	{
-	  cpu/arm920t/start.o	(.text)
+	  arch/arm/cpu/arm920t/start.o	(.text)
 	  lib/zlib.o	(.text)
 	  lib/crc32.o	(.text)
 	  lib/string.o	(.text)